Product Character
The double jacketed vessel is specially designed for temperature sensitive and shear-force sensitive cells such as mammalian and insect cell cultures. With the thermostat system and pitched-blade impeller design, fragile cells can be gently mixed and cultivated for a long period of time without damaging the cells. A full assortment of accessories are offered as a standard package for your convenience.
- Double jacketed vessel provides sophisticated temperature control
- Pitched-blade impellers designed for fragile cell lines
- Color touch screen and graphical user interface for easy operation
- 2-stage DO cascade for precise DO (Dissolved oxygen) level control
- Real-time trend data recording ensures best fermentation performance
- Ethernet remote control ability allows you navigate and operate your fermentation process from your desktop
- No additional software required
- Low voltage DC brushless motor
- Quick connectors for easy operation
- 4 built-in assignable and programmable peristaltic pumps for automatic pH, antifoam and feeding control
- Automatic process allows you to set up your 15 steps programmable control
- Manual process allows you to run individual parameters independently
- Gas mixing station (optional) provides essential gasses such as CO2 and O2 for your mammalian culture
- Full accessories are offered as a standard package
|
Vessel |
Working Volume (liter) |
1L |
3L |
5L |
7L |
10L |
|
Total volume (liter) |
1.5 |
3.8 |
6.8 |
8.9 |
13.4 |
|
|
Construction of Material |
Borosilicate glass/ 316L stainless steel for headplate and all fittings |
|||||
|
Control Unit |
Control Panel |
10.4" Color touch-screen interface |
||||
|
Communication Port |
Remote control through Ethernet |
|||||
|
Data export through USB port |
||||||
|
RS-485 port for system extension |
||||||
|
Program storage |
Up to 59,994 process programs |
|||||
|
Log data storage |
Up to 100 process monitoring data files |
|||||
|
Cabinet material |
ABS front panel and painted iron housing |
|||||
|
Dimension |
Footprint: W x D = 15.75" x 19.69" (400mm x 500mm) |
|||||
|
Height: 29.14" (740mm) |
||||||
|
Rated voltage |
110V/220V; 50 - 60 Hz |
|||||
|
Aeration |
Inlet gas flow-meter |
0, 1 to 10 LPM |
0, 2 to 20 LPM |
|||
|
Sparger |
Orifice ring |
|||||
|
Baffle |
Removable 316L stainless steel baffles |
|||||
|
Temperature |
Control System |
Thermostat System |
||||
|
Built-in heat exchanger (400W heater/ water circulation pump) |
||||||
|
Automatic cooling water valve |
||||||
|
Range |
5°C (41°F) above coolant up to 60°C (140°F) |
|||||
|
Resolution |
0.1°C |
|||||
|
Probe |
Platinum RTD probe (PT-100) |
|||||
|
Control mode |
Manual or Programmable 15 steps PID control |
|||||
|
Agitation |
Drive |
Removable top brushless motor |
||||
|
Speed range |
Two agitation speed ranges: a. For extremely shear-sensitive cell line: 30-300 rpm b. For fermentation and cell culture: 30 - 1200 rpm (3-7L); 30 - 700 rpm (10L) |
|||||
|
Resolution |
1 rpm |
|||||
|
Impeller |
Two impeller types: a. For shear-sensitive cell culture: 2 pcs of adjustable Pitched-blade impeller (standard) b. For fermentation: 3 pcs of adjustable Rushton-type impeller (optional accessory) Note: Customized impellers are available upon ordering |
|||||
|
Control mode |
Manual or Programmable 15 steps PID control |
|||||
|
pH |
Range |
2 to 14 pH |
||||
|
Resolution |
0.01 pH |
|||||
|
Probe |
Gel-filled electrode, autoclavable |
|||||
|
Control mode |
Manual/Acid start/programmable 15 steps PID control with adjustable deadband |
|||||
|
DO |
Range |
0 to 200% |
||||
|
Resolution |
0.1% |
|||||
|
Probe |
Polarographic DO sensor; autoclavable |
|||||
|
Control mode |
2-stage DO cascade response: (operate under manual or process mode) |
|||||
|
a. Increase or decrease agitation speed |
||||||
|
Substrate feeding strategy |
||||||
|
ORP(optional) |
Measurement range |
-/+ 2000 mV |
||||
|
Resolution |
1 mV |
|||||
|
Probe |
Gel-filled electrode: Autoclavable |
|||||
|
Foam |
Probe |
316L stainless steel protector with insulated teflon tube; on/off control |
||||
|
Peristaltic Pump |
Pump number |
4x built-in Watson Marlow pumps; 1x external pump (MU-D series required, optional) |
||||
|
Motor type |
Precise stepping motor; minimum speed is 1 rpm |
|||||
|
Speed range |
0 to 65 rpm |
|||||
|
Resolution |
1 rpm |
|||||
|
Control mode |
Manual or Programmable 15 steps feeding control; pump can be assigned for Acid, Base, Antifoam and Substrate |
|||||
|
Exhaust |
Device type |
316L stainless steel condenser |
||||
|
|
||||||
|
Utility requirement |
Power Source |
100-120V, 50-60Hz or 210-230V, 50-60Hz with electrical safety cutoff switch |
||||
|
Water Source |
1 bar maximum (29 psi); water supplied to fermenter must be at least 15°C below set operating temperature |
|||||
|
Air Source |
2 bar maximum, must be dry, oil-free and filtered For 3-5L, minimum pressure 0.1499 kg/cm2and air flow rate 60L/min For 7-10L, minimum pressure 7.0 kg/cm2 and air flow rate 120L/min |
|||||
|
Sterilization |
Autoclave; size of the autoclave inner chamber must be able to accommodate vessel with condenser attached |
|||||
|
Product Description |
||
|
ACFS-01-AS5P-110/220V |
Complete Thermostat Fermentation System for 0.5L Double Jacketed Vessel, 110V/220V |
|
|
ACFS-01-A01P-110/220V |
Complete Thermostat Fermentation System for 1L Double Jacketed Vessel, 110V/220V |
|
|
ACFS-01-A03P-110/220V |
Complete Thermostat Fermentation System for 3L Double Jacketed Vessel, 110V/220V |
|
|
ACFS-01-A05P-110/220V |
Complete Thermostat Fermentation System for 5L Double Jacketed Vessel, 110V/220V |
|
|
ACFS-01-A07P-110/220V |
Complete Thermostat Fermentation System for 7L Double Jacketed Vessel, 110V/220V |
|
|
ACFS-01-A10P-110/220V |
Complete Thermostat Fermentation System for 10L Double Jacketed Vessel, 110V/220V |
|
|
Thermostast System with Double Jacketed Dish Bottom Vessel includes: |
||
|
Controller |
Thermostat System Controller |
|
|
Built-in rotameter |
||
|
4x built-in pump head |
||
|
Vessel |
Double jacketed vessel (includes glass body, head plate, T handling bar, 2 probe adaptors) |
|
|
2 adjustable Pitched-balde impellers |
||
|
Baffle assembly |
||
|
Condenser assembly |
||
|
Air sparger assembly |
||
|
Motor |
Brushless agitation motor |
|
|
Probes |
1 x pH probe and 1 x pH probe cable |
|
|
1 x DO probe and 1 x DO probe cable |
||
|
1 x Temperature probe and 1 x Temperature probe cable |
||
|
1 x Foam/Level sensor and 1 x Foam/Level sensor cable |
||
|
Start-up Kit |
Includes 4 x 250 ml Glass Feeding Bottles, 1 x 500ml Glass Feeding Bottle, 10 x 45 mm 0.2 µm Autoclavable Disc Type Filters, 15 x Connecting Tubes, 16 x Silicon Tubing Clamps, 25 ft of 1/8" (3.2 mm) Silicon tube, 1 x Handy Burner, 1 x 2 mm Hex Wrench, and 1 x 12 mm & 14 mm Double Open-end Wrench |
|
