Dry Heating Lab Fermentor- Single Wall with Heating Base Unit
Product Character
The single wall plain bottom vessel is an ideal instrument for your routine culture or educational purposes. Durable stainless steel supporting rods and bottom plate are designed to withstand most heavy usage. Fast cooling and heating is achieved through the inner cooling coil and heating base unit.
Features:
· Durable vessel design for the routine and heavy duty jobs
· Color touch screen and graphical user interface for easy operation
· Real-time trend data recording ensures best fermentation performance
· 2-stage DO cascade for precise DO (dissolved oxygen) level control
· Ethernet remote control ability allows you navigate and operate your fermentation process from desktop
· No additional software required
· Low voltage DC brushless motor
· Quick connectors for easy operation
· 4 built-in assignable and programmable peristaltic pump for automatic pH, antifoam and feeding control
· Wider temperature control range, up to 90°C (194°F)
· Automatic process allows you to set up your 15 steps programmable control
· Manual process allows you to run individual parameters independentlyFull accessories are offered as a standard package
· Large inoculation port for easy access
· Full accessories are offered as a standard package
Specification:
|
Vessel |
Working volume (Liter) |
3L |
5L |
7L |
10L |
|
Total volume (Liter) |
3.7 |
6.5 |
9.1 |
13.0 |
|
|
Material |
Borosilicate glass / 316L stainless steel for headplate and all fittings |
||||
|
Control Unit |
Control panel |
10.4" Colorful touch-screen interface |
|||
|
Communication port |
Remote control through Ethernet |
||||
|
Data export through USB port |
|||||
|
RS-485 port for system extension |
|||||
|
Program storage |
Up to 59,994 process programs |
||||
|
Log data storage |
Up to 100 process monitoring data files |
||||
|
Cabinet material |
ABS front panel and painted iron housing |
||||
|
Dimension |
Footprint: W x D = 15.75" x 19.69", (400 x 500 mm) |
||||
|
Height = 29.13", (740 mm) |
|||||
|
Rated voltage |
110V ~/220V~ ; 50-60 Hz |
||||
|
Aeration |
Inlet gas flow-meter |
0, 1-10 LPM |
0, 2-20 LPM |
||
|
Sparger |
Orifice ring |
||||
|
Baffle |
Removable 316L stainless steel baffles |
||||
|
Temperature |
Heating |
Bottom heating plate (Base unit) |
|||
|
Cooling |
Cooling coil |
||||
|
Range |
5°C (41°F) above coolant up to 90°C (194°F) |
||||
|
Resolution |
0.1°C |
||||
|
Probe |
Platinum RTD probe (Pt 100) |
||||
|
Control mode |
Manual or Programmable 15 steps PID control |
||||
|
Agitation |
Drive |
Removable top brushless motor |
|||
|
Speed range |
Two agitation motor ranges: |
||||
|
For fermentation and cell culture: 30 - 1,000 rpm (10L); 30 - 1,200 rpm (3~7L) |
|||||
|
Resolution |
1 rpm increment |
||||
|
Impeller |
3 adjustable Rushton-type impellers |
||||
|
Control mode |
Manual or Programmable 15 steps PID control |
||||
|
pH |
Range |
2 -14 pH |
|||
|
Resolution |
0.01 pH |
||||
|
Probe |
Gel-filled electrode; Autoclavable |
||||
|
Control mode |
Manual/ Acid Start/ Programmable 15 steps PID control |
||||
|
DO |
Range |
0 - 200% |
|||
|
Resolution |
0.1% |
||||
|
Probe |
Polarographic DO sensor; Autoclavable |
||||
|
Control mode |
2-stage DO cascade response: (operate under manual or process mode) |
||||
|
a. Increase or decrease agitation speed |
|||||
|
b. Oxygen enrichment module (optional device required) |
|||||
|
c. Gas Mixing Station module (optional device required) |
|||||
|
Substrate feeding strategy |
|||||
|
ORP |
Measurement range |
-/+ 2000mV |
|||
|
Resolution |
1 mV |
||||
|
Probe |
Gel-filled electrode; Autoclavable |
||||
|
Foam |
Probe |
316L stainless steel protector with insulated telfon tube; |
|||
|
On/Off control |
|||||
|
Peristaltic pump |
Pump number |
4 Built-in pumps; One external pump (optional device required) |
|||
|
Motor type |
Precise stepping motor; minimum speed is 1 rpm |
||||
|
Speed range |
0 - 65 rpm |
||||
|
Resolution |
1 rpm |
||||
|
Control mode |
Manual or Programmable 15 steps feeding control; |
||||
|
Pump can be assigned for Acid, Base, Antifoam and Substrates |
|||||
|
Exhaust |
Device type |
316L stainless steel condenser |
|||
|
Utility requirement |
Power Source |
100-120V~50-60Hz or 210-230V~50-60Hz with electrical safety cutoff switch |
|||
|
Water Source |
2 Bar maximum (29 psi); water supplied to fermenter must be at least 15°C below set point operatin temperature |
||||
|
Air Source |
1 Bar maximum, must be dry, oil-free and filtered |
||||
|
Sterilization |
Autoclave; size of autoclave inner chamber must be able to accomdate vessel with attached condenser |
||||
|
ACFS-02-D03P-220 |
Complete Dry Heating Fermentation System for 3L Single Wall Plain Bottom Vessel, 220V |
|
ACFS-02-D05P-110 |
Complete Dry Heating Fermentation System for 5L Single Wall Plain Bottom Vessel, 110V |
|
ACFS-02-D05P-220 |
Complete Dry Heating Fermentation System for 5L Single Wall Plain Bottom Vessel, 220V |
|
ACFS-02-D07P-110 |
Complete Dry Heating Fermentation System for 7L Single Wall Plain Bottom Vessel, 110V |
|
ACFS-02-D07P-220 |
Complete Dry Heating Fermentation System for 7L Single Wall Plain Bottom Vessel, 220V |
|
ACFS-02-D10P-110 |
Complete Dry Heating Fermentation System for 10L Single Wall Plain Bottom Vessel, 110V |
|
ACFS-02-D10P-220 |
Complete Dry Heating Fermentation System for 10L Single Wall Plain Bottom Vessel, 220V |
|
Dry Heating System with Single Wall Plain Bottom Vessel and Heating Base Unit includes: |
|
|
Controller |
Dry Heating System Controller |
|
Built-in rotameter |
|
|
4 x built-in pump head |
|
|
Vessel |
Single wall plain bottom vessel |
|
3 adjustable Rushton-type impellers |
|
|
Baffle assembly |
|
|
Condenser assembly |
|
|
Air sparger |
|
|
Motor |
Agitation motor |
|
Probes |
1 x pH probe and 1 x pH cable |
|
1 x DO probe and 1 x DO cable |
|
|
1 x Temperature probe and 1 x Temperature cable |
|
|
1 x Foam/Level sensor and 1 x Foam/Level sensor cable |
|
|
Start-up Kit |
Includes 4 x 250 ml Glass Feeding Bottles, 1 x 500ml Glass Feeding Bottle, 10 x 45 mm 0.2 µm |
