Features:
- Feed of ultrapure water system
- Glassware washing
- Microbiological analysis
- Sample diution and reagent preparation
- Chemical and qualitative analysis
- Water analysis and universal HPLC
- Spectrum measurement
- Water for production technology
- Feed of autoclave sterilizer ,biochemical analyzer , immunoassay analyzer , constant temperature and humidity chamber , salt spray test chamber, dampening machine and etc.
Specification:
|
UPW-125QM |
UPW-94QM |
UPW-63QM |
UPW-45QM |
Model |
|
Tap water: TDS<200 ppm, 5-45°C, 1.0-4.0Kgf/cm2 (Extra pretreatment filter is recommended, if TDS>200ppm) |
Feed water requirements*
|
|||
|
PF+AC+RO+AC+DI+TF |
Flow procedure |
|||
|
Deionized water quality |
||||
|
>10-18.2MΩ.cm |
Resistivity |
|||
|
0.055-0.1µs/cm |
Conductivity |
|||
|
<0.1cfu/ml |
Bacteria |
|||
|
|
RO water quality |
|||
|
96%-99% (New RO membrane) |
Ion rejection rate |
|||
|
>99%, when MW>200 Dalton |
Organic rejection rate |
|||
|
99% |
Particles and bacteria rejection rate |
|||
|
125 liters/hour |
94 liters/hour |
63 liters/hour |
45 liters/hour |
Output(25°C) |
|
2: RO water, deionized water |
Pure water outlet |
|||
|
Length×Width×Height:640×540×1110mm/ Weight: about 70Kg |
Dimension/Weight |
|||
|
AC110-220V, 50/60Hz, 240W |
AC110-220V, 50/60Hz, 120W |
Electric requirements |
||
|
Main body (Including 1 set of cartridges)+ 2 built-in15 liters tank+ TDS pen(QE) +accessory bag |
Standard configuration |
|||
- The feed water quality will influence the pure water´s quality and cartridges´ life-span.
- PF: polypropylene spun fiber, AC :active carbon, RO :reverse osmosis, DI:ion exchange, TF:terminal microfiltration..
- All the specifications are tested under the situation: feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
