- High-speed processing chip, advanced algorithm and high-responsive software, resulting in even
faster analysis.
- High-performance X-ray Tube, Ultra-high Resolution Detector combined with Digital Multi-channel
Processing Technology, yielding super-high detection resolution.
- Indicator lights flash on both sides for safety purposes during measurement, i.e., the built-in double
beam technology will automatically sense whether there is a sample at the measurement window.
- Industrial resistive touch screen, superior to capacitor screen in back-light and clearer against sunlight
in the field. At the same time, people don’t need to take off gloves when they are operating machine in some
particular environment.
- XRF-2000 utilizes anti-slip, abrasion resistance and streamlined design, which is light and easy to carry.
It also integrates the new high speed digital multi-channel technology, the new library grade base
Identification system and the super-FP algorithm. These features allow it to measure elements faster, with higher accuracy and greater repeatability.
- Intelligent battery management exerts a real-time monitoring of the residual capacity of battery and
Backup battery through MSBUS bus.
- Automatic switch to standby mode when not used and recovery after the machine is picked up, which saves power and extends working time; moreover,
XRF-2000 has a gravity sensing system which shuts down instrument automatically when it accidentally falls down, another safety consideration;
XRF-2000 will also give out alarm when ambient temperature or humidity exceeds the scope of application.
- XRF-2000 adjusts air pressure factor automatically based on altitude it has detected.
This function increases excitation effect of light elements by 40% and that of rare earth elements by 30%.
- XRF-2000 is supportive to battery hot plug, hence battery can be replaced without powering off the machine.
- On XRF-2000 , users can customize the reports by adding their company logos, addresses, test results, spectrum and others (such as product description, origin of products and batch number).
- XRF-2000 is built with double beam technology which can automatically sense whether there is a sample at the measurement window. This is also a safety and protection feature.
The brightness of the display of XRF-2000 is automatically regulated according to environment brightness.
- XRF-2000 can be configured and maintained in a remote way via Internet.
- XRF-2000 can build a three dimensional element content distribution graph allowing for a fast estimate of mineral reserves or the extent of geological disaster with the built-in GPS for latitude and longitude reading combined with a 3rd party GIS analysis software.
- XRF-2000 ‘s new algorithm optimizes the spectral resolution, so lower detection limits can be achieved,which are comparable with even large-scale lab instruments.
- XRF-2000 Ultra-short optical™ path design can significantly improve light element excitation effects, without the fall/fill condition.
- XRF-2000 has a built-in environmental sensing system covering conditions such as temperature, dust humidity and others.
Application Features
- Excellent Performance
XRF-2000 shows element symbols in both English and Chinese. With high precision, high testing speed and comparable results to even that of laboratory equipment, XRF-2000 displays alloy grade and elements percentage content (up to three decimals) and ppm content in an apparent way.
- One-touch operation
XRF-2000 test lasts only a few seconds and identification of alloy grades takes only 1 or 2 seconds.
This facilitates operation by non-technical users.
- Nondestructive testing (NDT)
XRF-2000 test does not damage or have any adverse effect on the use of samples. No damage is foreseen in the entire test process.
- Acculab analysis software
Acculab analysis software is a professional analysis software which enables the users to easily configure passwords, customize analysis reports attached with company LOGO and implement remote control of machine; users can edit alloy grade library, add their own grade number or define their own company’s alloy brands; the software also allows automatic calibration of instrument and diagnosis of problems in a remote way; the software can be updated via Internet.
- Scrap metal recycling and sorting
Scrap metal recycling, reuse, and on-site analysis and sorting. XRF-2000 offers a rapid and reliable identification of the scrap metals when scrap metals are transacted between buyers and sellers.
XRF-2000 delivers quantitative element analysis of iron alloy, copper alloy, aluminum alloy, copper-iron alloy, lead-tinalloy, mixed alloys, etc, and rapid identification and sorting of these alloys on the site.
- Application fields, safety and standards
XRF-2000 is suitable for alloy material identification (PMI) for incoming inspection; material inventory management; re-inspection of construction materials in petrochemical construction, metal smelting, pressure vessel, power plant, petrochemical industry, fine chemical, pharmaceutical, aerospace and other industries to avoid serious safety accidents resulting from mixed or unqualified materials.
- Quality Control, Quality Assurance (QC/QA) and Error-proofing(PKKA - YOKE)
In metal processing and manufacturing industry, quality control and quality assurance (QC/QA) and error
proofing (PKKA - YOKE) of materials (raw materials), semi-finished products and finished products is indispensable. Use of mixed or unqualified materials will bring losses to the company. This is true to companies
ranging from small metal processing plants to large aircraft manufacturers.
- Data Processing and Enterprise Resource Planning (ERP)
Data can be transferred via USB, WIFI and Bluetooth and stored in excel, pdf or other formats. Users can
customize the reports by adding their company logos, addresses, test results, spectrum and others (suchas product description, origin of goods and batch number);
i-cloud data storage service is optional. Data can transport to Enterprise Resource Planning (ERP) system.
XRF-2000 860 elements analyzed Scope of elements in standard test mode can be extended if there is such a need.
XRF-2000 can analyze Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd,
Sn, Sb, Hf, Ta, W, Re, Pb, and Bi,totaling 30 elements.
Application fields
- Nondestructive, rapid and accurate analysis of alloy elements and alloy grade identification on the site
- Metal identification /scrap metal sorting
- QA/QC management in metal production, processing, casting, etc
- Medicine and biological medicine
- Identification of positive materials, oil refining and petrochemical industry
- Thermal power plant, hydroelectric power station, nuclear power plant
- Accurate element analysis of raw material and PMI identification so as to meet production needs
and ensure security of equipment and materials used in the process
.
Instrument specification
- The ARM architecture Cortex-A8 1 GHZ
- System Processor: The Android 4.2 operating system/80MHZ ADC digital pulse processor/4096 MCA
channel , 32GB memory
- Display: Industrial resistive touch screen with screen size of 4.3″
- Data storage: Built-in 32gb memory, 300,000 spectral data and spectrum can be stored
- Operating Temperature: -20℃~+50℃
- Operating Humidity: ≤90%Limit of
- Library of extensible and customizable alloys
- Ability to make measurements on pipes, flat surfaces, surface integrals and welds
- Method of analysis: the x-ray energy dispersive method for analysis of fluorescence
- Simultaneously detect elements: simultaneously detect dozens of elements
- Processor and RAM:
CPU: 1GB
RAM: 1GB
- The standard configuration: 32G
- Range content: ppm ~ 99.99%
15 seconds reading time
- GPS, WIFI: integrated into the system
- Battery: lithium battery, which can be loaded with a maximum capacity of our 6800Ah can operate continuously for 8 hours; Equipped with high voltage (110V-220V) adapter, can work under current alternative
- Sensor resolution: solid, liquid, powder
- Sensor resolution: low resolution can be 139eV
- Excitation source: 40KV / 100mA-Ag window miniature tube anode X of light and high voltage source
- Collimator and filter: sights of 4.0 or 2.0 of diameter, automatic switch of 8 filter. 12 kinds of groups, plusmode consisting of world, can satisfy different types of tests of samples
- Display: touchscreen TFT - LCD, resolution of 640 * 480.
- Protection against water, dust and shock
- Test window: 12mm.
- Charging system gas: Helium charging system of ordinary pressure.
- Security: standalone password manager mode.
- Data transmission: digital multi-channel technology, the transmission of data SPI, a quick scan, count rate, waterproof miniature USB, which can be connected to the desktop computer.
Alloy family
- Iron-based alloy series (stainless steel, chromium/molybdenum alloy steel, low alloy steel, tool steel, seamless steel)
- Nickel-based alloy series (nickel alloy, nickel/cobalt alloy)
- Cobalt-based alloy series
- Titanium-based alloy series
- Copper-based alloy Series (bronze, brass, copper and nickel alloy, etc.)
- High temperature alloys (molybdenum tungsten alloy)
- Aluminum-based alloy
- Super-FP algorithm is capable of detecting accurate metal element content and identify material without switching mode !
- XRF-2000 hand-held alloy analyzer (XRF) is a powerful weapon in material identification (PMI) in production of high temperature and high pressure boiler, container, pipe, etc; metal identification in iron and steel metallurgy, nonferrous metals, aerospace, weapons, submarine vessels, etc; metal material identification in engineering installation and construction projects in areas of the petrochemical refining, fine chemical, pharmaceutical, power plant, aerospace, etc to ensure equipment and material acceptance meet the project specified requirements; scrap metal recycling industry.
- XRF-2000 is applicable to quality control, material classification, alloy identification, accident investigation, etc, which tackles the fundamental difficult problem of raw material analysis. As an innovation of many modern technologies, it is a great helping hand in these applications. Users can personalize the analyzing system according to their own needs.
- XRF-2000 ‘s built-in alloy library contains 380 kinds of alloys, as well as other special alloys for mold, electric power, petrochemical and other industries, which simplifies the conversion of alloys from one country to another.
Besides, it has two built-in libraries that the users can define by themselves to extend alloy brands.
Therefore, it can extend to as many as 600 alloy brands and test more than 1,000 kinds of alloy materials.
Real-test Values of 316 samples:
XRF2000 radiation safety Radiation Safety Guarantee
- Low power (4W) X-ray tube, mini collimator reduce radiation quantity effectively;
- X-ray tube radiation protection shield avoids X-ray escape;
- The structure producing radiation is all in equipment interior, you don’t need to align or calibrate Xray, then ensure not detect any measurable radiation in equipment operation process;
- X ray indicator light alarms user the radiation produciton;
- Independent safe circuit and DoubleBeam interlock tool can protect user safety effectively;
- Conform to dosage limit requirement in <Radiation protection standards for X-ray diffraction and fluorescence analysis equipment> (GBZ115-2002);
- Conform to valid annual dosage limit requirement for workers and public in<Ionizing Radiation Protection and Safety of Radiation Sources basic standards> (GB18871-2002);
- After service1.Quality warranty:Acculab commits that XRF-2000 handheld spectrometer is fabricated with fine grade materials and top notch workmanship. It is brand new, never used, and in full compliance with the quality provision of this Contract.XRF-2000 warranty is 12 months starting from the date of final acceptance of the goods/commissioning of machine.
2.Technical training:
Operating Manual of XRF-2000 Handheld Spectrometers
Maintenance Manual of XRF-2000 Handheld Spectrometers
3.After-sale service
Over the years, Acculab has sold XRF instruments to many global users. In order to provide better
Technical support and service, it shall be committed to.
1services including
- a) Acculab shall provide after-sales service to all products it has sold worldwide.
- b) Acculab shall provide a one-year warranty for the spectrometer it has sold
worldwide.
- c) Acculab shal provide one-year warranty for X-ray Tube (X-ray tube)and Detector (Detector).
- d) Acculab shall provide one-year renewal warranty for the replaced components
in case there is any Replacement of them during repair of machine.
2The following physical damage is not covered by warranty.
a)instrument is impacted by great force that the internal impact sensor changes from white to red;
b)Detector is broken
c)PDA is broken;
d)Instrument body is broken;
e)Loss of accessories
f)Loss of components
g)Water coming into instrument 3In case the instrument is not able to operate, the customer can call after-sales
service for help; we offer 3 types of repairs:
a)Internet repair: if the customers are in foreign countries or remote areas, we can offer them first the INTERNET repair service.
b)Phone repair: customers called over the phone to explain explicitly the problem
and our technical staff will instruct them to solve the problem.
c)On-site repair: in case the phone repair fails, our technical personnel will go to the site to repair the instrument within 72 hours after the problem is reported;
4． Out-of-warranty service: upon expiry of the warranty period, all customers are still entitled to out-of-warranty service during the working life of the instrument.
5． Privilege in out-of-warranty service: customers shall have the privilege to get a preferential prices on the components when they maintain their instrument during the out-of-warranty period as long as they maintained it beforehand
Reviews
There are no reviews yet.